|
Steel City® 68R Recessed Covers

Aesthetic Recessed Service Made Affordable!
Plug in power and communication cords, and
then close the lid to hide unsightly plugs and
receptacles below the floor!
- Unique cover provides aesthetic recessed
service with costeffective box options for
concrete, wood sub-floor and raised floor
applications
- Patented lid can be rotated to expose
a small opening for cords, enabling the
lid to close flush with the floor while
in use
- Cover accepts one duplex or GFCI receptacle
– no special device plates required (receptacle
purchased separately)
- Cover accepts up to two communications
jacks – includes one 2-port keystone data
plate and one blank data plate for custom
cut-outs or power-only applications (communications
jacks purchased separately)
- Nonmetallic covers are available in
black, gray, beige and brown. Black covers
are available with an optional brass or
aluminum flange.
|
 |
3M Fire Production Products

- The complete line of 3M fire protection
products helps prevent fire, smoke, toxic
fumes and moisture from passing through
penetrations in fire-rated walls and floors.
- The easy-to-install products are suitable
for a wide variety of firestop applications,
including plastic pipes, metal pipes, HVAC
ductwork, cables, construction gaps, grease
ducts, wall tops and control joints.
|
 |
Portable Generators from Generac Power Systems

- From the smallest needs to the largest
with sizes from 1,800 to 17,500 Watts*
- Easy to use in a variety of applications
from camping to emergency home backup
- Quality engineering and design
- Durable construction for rugged reliability
- Long life engines for years of dependable
performance
*Full product line available in 2009
|
 |
POLYPRO® Type 4X Polyester Enclosures

- POLYPRO® features versatile; non-glass
filled polyester to safely house electronic
controls indoors and out
- A cost-effective alternative to aluminum
and stainless steel, corrosion-fighting
polyester is also lightweight and easy to
modify
- POLYPRO® is flame resistant and provides
ultraviolet protection while maintaining
a high environmental seal
|
 |
ES8

- High performance louver
- 2-lamp profile - 44% savings compared
to 3-lamp T8
- Full balanced illumination of the space
|
 |
Magnetic Screwdriver with 32-Piece Tamperproof
Bit Set

- Cushion-grip handle for greater torque
and comfort
- Sturdy bit and screw holding magnet
allows for screws to fit securely in place
for easy use
- Includes complete tamperproof bit set
in block
- TORX® is a registered trademark of Acument
Intellectual Properties, LLC
- TORQ-SET® and Tri-Wing® are registered
trademarks of Phillips Screw Co.
|
 |
Max Punch

An advanced knockout tool used with a cordless
drill to draw punch dies together for quick
accurate knockouts.
No hydraulics, no ratcheting, no mess. Compatible
with your current punch dies.
2 inch knockout in 4 seconds.
4 inch knockout in 6 seconds.
MP-01CS
- Max Punch
- ½ inch – 4 inch die set
- Step drill bit and Maxis Marksman
MP-01SD
- Max Punch
- ½ inch – 2 inch die set
- Step drill bit and Maxis Marksman
MP-01
|
 |
Wiring Device-Kellems

- Hubbell offers TR code compliant devices
for residential and commercial applications
- Available in decorator, standard and
GFCI styles
- Spring-loaded shutters allow plugs to
enter but keep single pronged items like
keys, pins and screwdrivers out
|
 |
Commercial Grade Decorator Combination Devices

- 15A 120/277V/AC rating is ideal for
incandescent or fluorescent lighting fixtures
typical in commercial applications
- Thermoplastic rocker, top and back body
are virtually unbreakable for durable performance
- Available in Almond, Light Almond, Ivory
and White
- Back wire clamps on side terminals provide
for easy installation of #12 and #14 gauge
wire
- Automatic grounding system on all devices
|
 |
Allied’s Kwik-Fit® Compression EMT

- Reduce installation time by 50%
- Eliminates the need to purchase, store,
or install separate couplings
- E-Z Pull® interior finish provides a
smooth raceway for fast wire-pulling
- Strength combined with ductility for
easy bending
- Hot-galvanized steel for durability

|
 |
Capri One BY CAPRI LIGHTING

Capri One is a modular downlight system designed
for speed and flexibility. There are three components
to the Capri One system.
Metal frames
- Can be ordered for 4”, 6”, 8” or 10”
apertures, with remodel and sloped ceiling
options available.
Wide variety of electrical systems
- The electrical systems are designed
around either incandescent, compact fluorescent,
or HID lamp sources of all wattages.
Broad selection of Capri One trims
- Trims can be ordered with lenses or
baffles, and many are listed for use in
wet location areas.
|
 |
Laredo LCC Series

(LED version shown)
- The compact Laredo is designed for entrance
and single story perimeter lighting
- 6-12 foot applications
- Available in energy-saving Pulse Start,
CFL, HPS and LED
- Full cut off, StarView compliant
- Neighbor friendly, CSA certified to
UL 1598 for use in wet locations
|
 |
Sylvania Quicktronic High Efficiency T8
Universal Voltage Ballast

- Standard QHE ballasts offered in low
ballast factor, normal ballast factor, and
high ballast factor models
- UL Type CC (commercial cabinet) rated
units in low ballast factor and normal ballast
factor models
- Features LSC (lamp striation control)
to minimize striations in T8 energy saving
lamps
|
 |
|