Section 2000: Grounds and Jumper Components

• Bronze body, Smooth jaws, Bronze T-handle/eyescrew with fine threads, 5/8"-11 UNC terminal threads

Electrical Ratings:

• Continuous Current: 200 Amps
• Fault Current - 15 Cycles: 21,500 Amps
• Fault Current - 30 Cycles: 15,000 Amps

Mechanical Ratings:

• Recommended Torque: 200 in-lbs.
• Main Line Range - Maximum: 477 kcmil ACSR/.814"
• Main Line Range - Minimum: #6 Sol. Cu./.162"
• Jumper Range - Maximum: 4/0 Grd. Cable w/Threaded Stud
• Jumper Range - Minimum: #2 Grd. Cable w/Threaded Stud
• Weight Each: 1-1/2 lbs.
• ASTM Designation: Type 1, Class A, Grade 2

• Bronze body, Smooth jaws, Bronze eyescrew - with fine threads, drilled terminal, no threads

Electrical Ratings:

• Continuous Current: 200 Amps
• Fault Current - 15 Cycles: 21,500 Amps
• Fault Current - 30 Cycles: 15,000 Amps

Mechanical Ratings:

• Recommended Torque: 200 in-lbs.
• Main Line Range - Maximum: 477 kcmil ACSR/.814"
• Main Line Range - Minimum: #6 Sol. Cu./.162"
• Jumper Range - Maximum: 4/0 Grd. Cable w/Threaded Stud
• Jumper Range - Minimum: #2 Grd. Cable w/Threaded Stud
• Weight Each: 1-1/2 lbs.
• ASTM Designation: Type 1, Class A, Grade 2

• Bronze body, Smooth jaws, Bronze eyescrew - with fine threads, drilled terminal, no threads

Electrical Ratings:

• Continuous Current: 400 Amps
• Fault Current - 15 Cycles: 43,000 Amps
• Fault Current - 30 Cycles: 30,000 Amps

Mechanical Ratings:

• Recommended Torque: 350 in-lbs.
• Main Line Range - Maximum: 1033 kcmil ACSR/1.25"
• Main Line Range - Minimum: #6 Sol. Cu./.162"
• Jumper Range - Maximum: 4/0 Grd. Cable w/Threaded Stud
• Jumper Range - Minimum: #2 Grd. Cable w/Threaded Stud
• Weight Each: 2 lbs.
• ASTM Designation: Type 1, Class A, Grade 5

Aluminum body, Smooth jaws, Eyescrew handle, 5/8"-11 thread

Electrical Ratings:

• Continuous Current: 300 Amps
• Fault Current Rating: ASTM Grade 3
• Fault Current - 15 Cycles: 27,000 Amps
• Fault Current - 30 Cycles: 20,000 Amps

Mechanical Ratings:

• Recommended Torque: 250 in-lbs.
• Jumper Range - Maximum: 2/0 Cable w/ Threaded Terminal
• Jumper Range - Minimum: #2 Cable w/ Threaded Terminal
• Weight: 1 lbs.
• Jaw Opening - Maximum: 0.998"
• Jaw Opening - Minimum: 0.128"

Aluminum body, Serrated jaws, Eyescrew handle, 5/8"-11 thread

Electrical Ratings:

• Continuous Current: 400 Amps
• Fault Current Rating: ASTM Grade 5
• Fault Current - 15 Cycles: 43,000 Amps
• Fault Current - 30 Cycles: 30,000 Amps

Mechanical Ratings:

• Recommended Torque: 250 in-lbs.
• Jumper Range -Maximum: 4/0 Cable w/ Threaded Terminal
• Jumper Range - Minimum: #2 Cable w/ Threaded Terminal
• Weight: 1 lbs.
• Jaw Opening - Maximum: 1.25"
• Jaw Opening - Minimum: 0.128"

• Aluminum body, Smooth jaws, Bronze eyescrew with fine threads, 5/8"-11 UNC terminal threads

Electrical Ratings:

• Continuous Current: 400 Amps
• Fault Current - 15 Cycles: 43,000 Amps
• Fault Current - 30 Cycles: 30,000 Amps

Mechanical Ratings:

• Recommended Torque: 250 in-lbs.
• Main Line Range - Maximum: 1000 kcmil Cu., 1590 ACSR/1.50"
• Main Line Range - Minimum: #6 Sol. Cu./.162"
• Jumper Range - Maximum: 4/0 Grd. Cable w/Threaded Stud
• Jumper Range - Minimum: #2 Grd. Cable w/Threaded Stud
• Weight Each: 1-1/2 lbs.
• ASTM Designation: Type 1, Class A, Grade 5

Features:

• Can be installed on all electrical facilities, apparatus, tubes and conductors as well as various equipment (trucks, pulling equipment, etc.)
• This universal clamp can also be used on a jumper cable
• Installation on conductor, round bus bar and grounding ball stud of 20mm and 25mm
• Thermal shock indicator changes color (from white to red) when the clamp reaches a temperature of 200°F
• Stress-relief to reduce cable damage and serve as a shock damper if fault occurs
• Locations on each side of the clamp for 20mm or 25mm grounding ball studs installation, which serve as support studs for either a grounding cluster or cascade assembly
• Fitted to receive a 5/8"-11UNC threaded stud ferrule
• Lubrication chamber for upkeep of threads
• Installation eye for installing clamp with shotgun stick
• Double internal threads for fast installation and removal

Material:

• Aluminum Clamp and Keeper

• Aluminum body, Smooth jaws, Bronze eyescrew with Acme threads, 5/8"-11 UNC terminal thread

Electrical Ratings:

• Continuous Current: 400 Amps
• Fault Current - 15 Cycles: 43,000 Amps
• Fault Current - 30 Cycles: 30,000 Amps

Mechanical Ratings:

• Recommended Torque: 250 in-lbs.
• Main Line Range - Maximum: 2" O.D. Bus
• Main Line Range - Minimum: #6 Sol. Cu./.162"
• Jumper Range - Maximum: 4/0 Grd. Cable w/Threaded Stud
• Jumper Range - Minimum: #2 Grd. Cable w/Threaded Stud
• Weight Each: 1-3/4 lbs.
• ASTM Designation: Type 1, Class A, Grade 5

• Aluminum body, Serrated jaws, Eyescrew handle, 5/8"-11 thread

Electrical Ratings:

• Continuous Current: 400 Amps
• Fault Current Rating: ASTM Grade 5
• Fault Current - 15 Cycles: 43,000 Amps
• Fault Current - 30 Cycles: 30,000 Amps

Mechanical Ratings:

• Recommended Torque: 250 in-lbs.
• Jumper Range - Maximum: 4/0 Cable w/ Threaded Terminal
• Jumper Range - Minimum: #2 Cable w/ Threaded Terminal
• Weight: 1.75 lbs.
• Jaw Opening Size - Maximum: 2"
• Jaw Opeing Size - Minimum: 0.162"

Aluminum body, Smooth jaws, Eyescrew handle, Pressure Terminal

Electrical Ratings:

• Continuous Current: 400 Amps
• Fault Current Rating: ASTM Grade 5
• Fault Current - 15 Cycles: 43,000 Amps
• Fault Current - 30 Cycles: 30,000 Amps

Mechanical Ratings:

• Recommended Torque: 250 in-lbs.
• Jumper Range - Maximum: 4/0 Cable w/ Threaded Terminal
• Jumper Range - Minimum: #2 Cable w/ Threaded Terminal
• Weight: 2.75 lbs.
• Jaw Opening - Maximum: 2"
• Jaw Opening - Minimum: 0.162"

• Aluminum body, Serrated jaws, Bronze eyescrew with Acme threads, Bronze pressure-type terminal

Electrical Ratings:

• Continuous Current: 400 Amps
• Fault Current - 15 Cycles: 43,000 Amps
• Fault Current - 30 Cycles: 30,000 Amps

Mechanical Ratings:

• Recommended Torque: 250 in-lbs.
• Main Line Range - Maximum: 2" O.D. Bus
• Main Line Range - Minimum: #6 Sol. Cu./.162"
• Jumper Range - Maximum: 4/0 Grd. Cable w/Threaded Stud
• Jumper Range - Minimum: #2 Grd. Cable w/Threaded Stud
• Weight Each: 2 lbs.
• ASTM Designation: Type 1, Class B, Grade 5

• Aluminum body, Smooth jaws, Eyescrew handle, Pressure terminal type

Electrical Ratings:

• Continuous Current: 300 Amps
• Fault Current Rating: ASTM Grade 3
• Fault Current - 15 Cycles: 27,000 Amps
• Fault Current - 30 Cycles: 20,000 Amps

Mechanical Rating:

• Recommended Torque: 250 in-lbs.
• Jumper Range - Maximum: 2/0 Cable w/ Plain Terminal
• Jumper Range - Minimum: #2 Cable w/ Plain Terminal
• Weight: 1.5 lbs.
• Jaw Opening Size - Maximum: 0.574"
• Jaw Opening Size - Minimum: 0.162"

• Aluminum body, Smooth jaws, Bronze eyescrew with fine threads, Bronze pressure-type terminal

Electrical Ratings:

• Continuous Current: 400 Amps
• Fault Current - 15 Cycles: 43,000 Amps
• Fault Current - 30 Cycles: 30,000 Amps

Mechanical Ratings:

• Recommended Torque: 250 in-lbs.
• Main Line Range - Maximum: 566 kcmil Cu., 900 kcmil ACSR/1.162"
• Main Line Range - Minimum: #6 Sol. Cu./.162"
• Jumper Range - Maximum: 4/0 Grd. Cable w/Plain Plug
• Jumper Range - Minimum: #2 Grd. Cable w/Plain Plug
• Weight Each: 1-1/2 lbs.
• ASTM Designation: Type 1, Class A, Grade 5

• Aluminum body, Smooth jaws, Bronze eyescrew with fine threads, 5/8"-11 UNC terminal threads

Electrical Ratings:

• Continuous Current: 400 Amps
• Fault Current - 15 Cycles: 43,000 Amps
• Fault Current - 30 Cycles: 30,000 Amps

Mechanical Ratings:

• Recommended Torque: 250 in-lbs.
• Main Line Range - Maximum: 566 kcmil Cu., 900 kcmil ACSR/1.162"
• Main Line Range - Minimum: #6 Sol. Cu./.162"
• Jumper Range - Maximum: 4/0 Grd. Cable w/Threaded Stud
• Jumper Range - Minimum: #2 Grd. Cable w/Threaded Stud
• Weight Each: 1-1/2 lbs.
• ASTM Designation: Type 1, Class A, Grade 5

• Aluminum body, Bronze upper jaw, Serrated jaws, Bronze eyescrew with Acme threads, 5/8"-11 UNC terminal threads

Electrical Ratings:

• Continuous Current: 400 Amps
• Fault Current - 15 Cycles: 43,000 Amps
• Fault Current - 30 Cycles: 30,000 Amps

Mechanical Ratings:

• Recommended Torque: 250 in-lbs.
• Main Line Range - Maximum: 950 kcmil Cu., 1510 kcmil ACSR/1.506"
• Main Line Range - Minimum: #6 Sol. Cu./.162"
• Jumper Range - Maximum: 4/0 Grd. Cable w/Threaded Stud
• Jumper Range - Minimum: #2 Grd. Cable w/Threaded Stud
• Weight Each: 1-1/2 lbs.
• ASTM Designation: Type 1, Class B, Grade 5

Features:

• Thermal shock indicator changes color (from white to red) when the clamp reaches a temperature of 200°F
• 3/4-10 UNC double lead threads for strength and fast installation
• Lubrication chamber for upkeep of threads
• Stress relied to reduce cable damage and serve as a shock damper if fault accurs
• Material: Aluminum

Specifications:

• Weight: 1.2 lbs.
• Jumper Cable Minimum: #2
• Jumer Cable Maximum: 4/0
• Dimensions: 6-7/8" x 5-1/2" x 2-7/8"
• Main Conductor Minimum: 6 AWG (.16)
• Main Conductor Maximum: 900 MCM (1.162)
• Capacity 15 Cycles:

35 kA (IEC)*

50 kA (ASTM)*

* = IEC rating is Phase-Phase on 900 MCM conductor, ASTM rating is Phase-Ground on 900 MCM conductor

• Aluminum body, Serrated jaws, Bronze eyescrew with fine threads, 5/8"-11 UNC terminal threads

Electrical Ratings:

• Continuous Current: 400 Amps
• Fault Current - 15 Cycles: 25,000 Amps
• Fault Current - 30 Cycles: 25,000 Amps

Mechanical Ratings:

• Recommended Torque: 250 in-lbs.
• Main Line Range - Maximum: 1-1/2" Angles, 1-1/2" Flat
• Main Line Range - Minimum: 1/8"
• Jumper Range - Maximum: 4/0 Grd. Cable w/Threaded Stud
• Jumper Range - Minimum: #2 Grd. Cable w/Threaded Stud
• Weight Each: 1-1/2 lbs.
• ASTM Designation: Type 1, Class B, Grade 3

• Aluminum body, Serrated jaws, Bronze T-handle with Acme threads, 5/8"-11 UNC terminal threads

Electrical Ratings:

• Continuous Current: 400 Amps
• Fault Current - 15 Cycles: 25,000 Amps
• Fault Current - 30 Cycles: 25,000 Amps

Mechanical Ratings:

• Recommended Torque: 250 in-lbs.
• Main Line Range - Maximum: 1-1/2" Angles, 1-1/2" Flat
• Main Line Range - Minimum: 1/8"
• Jumper Range - Maximum: 4/0 Grd. Cable w/Threaded Stud
• Jumper Range - Minimum: #2 Grd. Cable w/Threaded Stud
• Weight Each: 1-1/2 lbs.
• ASTM Designation: Type III, Class B, Grade 3

• Bronze body, Serrated jaws, T-handle, 5/8"-11 thread

Electrical Ratings:

• Continuous Current: 400 Amps
• Fault Current Rating: ASTM Grade 5
• Fault Current - 15 Cycles: 43,000 Amps
• Fault Current - 30 Cycles: 30,000 Amps

Mechanical Ratings:

• Recommended Torque: 250 in-lbs.
• Jumper Range - Maximum: 4/0 Cable w/ Threaded Terminal
• Jumper Range - Minimum: #2 Cable w/ Threaded Terminal
• Weight: 4 lbs.
• Jaw Opening Size - Maximum: 1.5"
• Jaw Opening Size - Minimum: 0.125"

• Bronze body, Serrated jaws, Eyescrew handle, 5/8"-11 thread

Electrical Ratings:

• Continuous Current: 400 Amps
• Fault Current Rating: ASTM Grade 5
• Fault Current - 15 Cycles: 43,000 Amps
• Fault Current - 30 Cycles: 30,000 Amps

Mechanical Ratings:

• Recommended Torque: 250 in-lbs.
• Jumper Range - Maximum: 4/0 Cable w/ Threaded Terminal
• Jumper Range - Minimum: #2 Cable w/ Threaded Terminal
• Weight: 3 lbs.
• Jaw Opening Size - Maximum: 1.5"
• Jaw Opening Size - Minimum: 0.125"

• Bronze body, Serrated jaws, Bronze eyescrew with fine threads, Bronze pressure-type terminal

Electrical Ratings:

• Continuous Current: 400 Amps
• Fault Current - 15 Cycles: 25,000 Amps
• Fault Current - 30 Cycles: 25,000 Amps

Mechanical Ratings:

• Recommended Torque: 250 in-lbs.
• Main Line Range - Maximum: 1-1/2" Angles, 1-1/2" Flat
• Main Line Range - Minimum: 1/8"
• Jumper Range - Maximum: 4/0 Grd. Cable w/Plain Plug
• Jumper Range - Minimum: #2 Grd. Cable w/Plain Plug
• Weight Each: 2-1/2 lbs.
• ASTM Designation: Type 1, Class B, Grade 3

Aluminum body, Smooth jaws, Eyescrew handle, 5/8"-11 thread

Electrical Ratings:

• Continuous Current: 400 Amps
• Fault Current Rating: ASTM Grade 5
• Fault Current - 15 Cycles: 43,000 Amps
• Fault Current - 30 Cycles: 30,000 Amps

Mechanical Ratings:

• Recommended Torque: 250 in-lbs.
• Jumper Range - Maximum: 4/0 Cable w/ Threaded Terminal
• Jumper Range - Minimum: #2 Cable w/ Threaded Terminal
• Weight: 2.3 lbs.
• Jaw Opening - Maximum: 2-1/2"
• Jaw Opening - Minimum: 0.232"

• Aluminum body, Smooth jaws, Bronze eyescrew with Acme threads, Bronze pressure-type terminal

Electrical Ratings:

• Continuous Current: 400 Amps
• Fault Current - 15 Cycles: 43,000 Amps
• Fault Current - 30 Cycles: 30,000 Amps

Mechanical Ratings:

• Recommended Torque: 300 in-lbs.
• Main Line Range - Maximum: 4" x 4" Square, 4.5" O.D. Bus
• Main Line Range - Minimum: 1/0 Str. Cu./.368"
• Jumper Range - Maximum: 4/0 Grd. Cable w/Plain Plug
• Jumper Range - Minimum: #2 Grd. Cable w/Plain Plug
• Weight Each: 5-1/4 lbs.
• ASTM Designation: Type 1, Class A, Grade 5

• 5/8"-11 UNC Threaded Terminal

Electrical Ratings:

• Continuous Current: 400 Amps
• Fault Current - 15 Cycles: 43,000 Amps
• Fault Current - 30 Cycles: 30,000 Amps

Mechanical Ratings:

• Recommended Torque: 250 in-lbs.
• Main Line Range - Maximum: 2-1/2" IPS/2.88"
• Main Line Range - Minimum: #2 Cu./.258"
• Jumper Range - Maximum: 4/0 Grd. Cable w/Threaded Stud
• Jumper Range - Minimum: #2 Grd. Cable w/Threaded Stud
• Weight Each: 3-1/4 lbs.
• ASTM Designation: Type 1, Class B, Grade 5

For temporary grounding of underground distribution cable with jacket over concentric neutral, special clamps help ensure contact with center conductor.

Spike-point clamp main-line capacity is 2-1/2".

With tapped terminal for threaded stud ferrule on #2 to 4/0 grounding cable

3" nominal shank length

These support studs can be installed on any pressure type terminal Ground Clamp, in place of the restraining strap immediately below the pressure terminal. The stud serves as a mechanical parking stand for a second clamp, preventing the clamp from making contact with the conductor or ground. This feature is particularly beneficial in three-phase grounding application.

Compact 5" aluminum-alloy bar accepts C-type or duckbill clamps for phase-to-phase grounding technique. Adjustable wheel binder and 36" chain for wood-pole applications. Hook style for attachment to tower angles.

Compact 5" aluminum-alloy bar (5/8" diameter) accepts C type or duckbill clamps for phase-to-phase grounding technique. Hook style for attachment to tower angles.

Specifications:

• Product: Cluster Bar
• Mount to: Tower Mounted
• Continuous Current: 400 Amps
• Fault Current - 15 Cycles: 43,000 Amps
• Fault Current - 30 Cycles: 30,000 Amps
• Weight: 10 lbs.

Chance terminal blocks are used to attach ground leads from grounding clamps to a common ground. These terminal blocks are also ideal where permanent temporary grounding sets are part of a substation emergency equipment. Accommodates 4/0 grounding cables with plain ferrules.

Bronze clamp is used to ground the bottom hinge contact on cutouts used on distribution riser poles or where grounding is required. It fits these cutouts: Chance F2, F3, and C Cutouts; Westinghouse LDX, Southern States B-80; Series 63; Joslyn; S&C Type SX; McGraw-Edison LMO, and GE Durabute. Clamp can be installed with or without grounding cable to aid as a warning and possibly avoid accidental closing of cutout. Clamp's drilled terminal accepts threaded-stud cable ferrules. It also accepts threaded L-Stud and T-Stud Terminals (3/4" diameter bronze) for use with conventional ground-clamp cable sets.

Electrical Ratings:

• Continuous Current: 300 Amps
• Fault Current Rating: ASTM Grade 3
• Fault Current - 15 Cycles: 27,000 Amps
• Fault Current - 30 Cycles: 20,000 Amps

Mechanical Ratings:

• Recommended Torque: 250 in-lbs.
• Jumper Range - Maximum: 2/0 Cable w/ Threaded Terminal
• Jumper Range - Minimum: #2 Cable w/ Threaded Terminal
• Handle Type: Eyescrew
• Weight: 2 lbs.

Electrical Ratings:

• Continuous Current: 300 Amps
• Fault Current - 15 Cycles: 27,000 Amps
• Fault Current - 30 Cycles: 20,000 Amps

Mechanical Ratings:

• Weight: 1 lbs.

Electrical Ratings:

• Continuous Current: 300 Amps
• Fault Current - 15 Cycles: 27,000 Amps
• Fault Current - 30 Cycles: 20,000 Amps

Mechanical Ratings:

• Weight: 1 lbs.

EQUI-MAT™

EQUI-MAT™

 

Each Pre-Packaged Kit includes Ground Grid plus Ground Set T600-2841 and Storage Bag C417-0147.

 

Catalog#	Grid Size
C600-2989	58" x 58"
C600-2990	58" x 120"
C600-2991	120" x 120"

Portable reel quickly pays-out/takes-up, helps keep ground sets clean and neat, ready for use. Handles are comfortable, turned aluminum. Lightweight unit can be carried to remote sites or tubular-steel frame can be U-bolted to deck or truck. Galvanized drum has ribbed flanges to resist flexing and beaded rims to eliminate sharp edges. Reel is for storage only. Cable and clamps should be removed completely from reel before use. Failure to do so could result in a dangerous voltage drop and violent mechanical reactions. A label on the unit gives this warning.

The Chance Screw Ground Rod provides a temporary ground where a system ground is not available. When installed, the 6' spiraled ground rod develops less resistance than straight ground rods. However, actual effectiveness depends upon soil properties. The reusable Ground rod is copper clad. The helix (spiral), handle and wing nut are bronze.

This tool can be used to pickup loads and carry 250 Amps at 15KV. Rubber gloves should be worn while installing. The head has a floating washer to minimize conductor damage as the jaws are installed. The contacts are spring loaded and can be closed by pulling an insulated lanyard, putting the operator away from the tool during pickup operations. The contacts cannot be teased closed. The tool cannot be used as a load break tool as the operator cannot open the contacts while the tool is on the conductor. A fiberglass rod, attached to the end of the lanyard, is used to recock the contacts, but because it must be inserted through the head of the tool, the lineman must remove the tool from the conductor before recocking. An orange-tinted clear Lexan® housing permits easy visual inspection. A nylon handguard is used to keep the lineman's hand away from the energized area. By simply removing the two screws in the handguard, the tool can be disassembled for inspection and maintenance. All current carrying parts are copper or copper alloy and contacts are silver plated. The recommended 15KV jumper cables for this tool are #2 and 1/0. It is recommended that the Load Pick-Up Tool be inspected and cleaned after 25 operations or after 90 days. Clean all plastic parts with soft cloth, damp with ethyl alcohol only.

Specifications:

• Main Line Range: .162" min.
• Main Line Range: 1.165" max.
• Continuous Current: 250 Amps
• Weight: 6.4 lbs.

The HASTINGS Load Pick-Up Tool can be installed with a shotgun stick or with rubber gloves. (In accordance with your company's safe work pratices.)

Both tools come completely self contained with cocking tool, firing lanyard, and safety latch. (Optional carrying case available.)

The Head Casting is an aluminum alloy and also serves as a storage port for the cocking tool.

Clear plastic housing below the head casting allows for quick, easy, and visual inspection.

Each tool comes complete with an Operating and Mainenance Manual.

Specifications:

• Main Line Range Minimum : 6 Solid / .16 dia.
• Main Line Range Maximum: 1033 MCM / 1.25 dia.
• KV Rating: 29.2 KV max.
• Current Rating: 300A max.
• Unit Weight:

6600 - 5.9 lbs.

6605 - 6.2 lbs.

01-089 - 2.7 lbs.

Warning: These Load Pick-Up tools are NOT LOAD BREAK devices!

Copper Grounding Cable is available in yellow and clear, is extra flexible for handling ease yet strong and tough for long wear. Jacketing is smooth, abrasion, weather and oil resistant in accordance with applicable ASTM Specifications, marked with AWG size approximately every 4 feet.

Yellow jackets are T-prene rubber compound with -20°F recommended low temperature. Clear jackets (which allow visual inspection of strand conditions) are ultraviolet-inhibited Poly Vinyl Chloride (PVC). Recommended low temperature for PVC-jacketed cable is 0°F.

Extra-flexible cables, because of their extra-fine strands, require termination ferrules when used with ground clamps.

Threaded-Stud type for topped or drilled grounding-clamp terminals. Shrounded threaded copper ferrules.

Plain-Plug type for pressure-type grounding-clamp terminals. Shrouded plain copper ferrules

Unshrouded ferrules are available either factory-installed in pairs on any cable length specified or as separate individual units, the ferrules install simply with a hydraulic crimping tool. Complete illustrated installation instructions come with the ferrules and include a table for the crimping die sizes to use.

Specifications:

• Material: Copper
• Terminal Type: Threaded or Drilled
• Weight: .50 lbs.

Unshrouded ferrules are available either factory-installed in pairs on any cable length specified or as separate individual units, the ferrules install simply with a hydraulic crimping tool. Complete illustrated installation instructions come with the ferrules and include a table for the crimping die sizes to use.

Specifications:

• Material: Aluminum
• Terminal Type: Threaded or Drilled
• Weight: .20 lbs.

• All ferrules are filled with inhibitive grease to prevent humidity infiltration
• Compression ferrules for 5/8-11 UNC threaded type terminal

Material:

• 99.9% electrolytic tin-plated copper
• Stainless steel hardware (nut and lock washer) and grease cap included

Extremely flexible even at low temperatures, this cable features an insulation/jacket combination resistant to abrasion, oil, heat, moisture and ozone. The natural orange color of this mold-cured ethylene-propylene-base coating imparts high visibility. For easy identification, AWG size and voltage rating are embossed at 4-foot intervals.

For extended service life, an extruded screen interfaces insulation and conductor. This strand screen improves voltage-stress control by adding dielectric strength and eliminating internal corona.

Insulation and conductor screen meet and exceed ICEA-NEMA standard S-68-516.

For easy handling in diverse conditions, conductors are extra flexible alloy-coated copper-stranded rope per ASTM B-189 or B-33.

Ampacity ratings are based on 90°C conductor temperature at 40°C ambient.

Copper Connector Assemblies are necessary to join cable and clamp together on Jumper Clamps or Load Pickup Tools only Threads are 5/8"-11 NC for all connectors. Each Catalog Number consists of a copper connector, nut and lockwasher.

The T601-0039 Jumper Clamp has the same polyethylene material in the handle as other Chance Jumper Clamps. The handle length below the handguard is 7-1/2". The 400 amp continuous current rating is based on using 4/0 Jumper Cable on the tap side.

The T601-0040 Jumper Clamp has a larger contact opening for use on larger conductor distribution lines. The handle length below the handguard is 8-3/8". Easy to assemble, the connector assemblies are interchangeable between the 15 & 25 kV Jumper Clamps. The 400 amp continuous current rating is based on using 4/0 Jumper Cable on the tap side.

Sure-lok™

 

The New Salisbury Sure-lok™ Jumper clamp is a revolutionary improvement over any other jumper clamp in the world. Featuring a ratchet type locking mechanism (patent pending), this is the only clamp available guaranteed not to loosen once installed on a line.

Loose Jumper clamps not only jeopardize your safety but can also cause fires and power outages. Even when torqued using wrenches or pliers, traditional clamps will eventually loosen from line vibrations and thermal cycling. This clamp tightens with a ratchet action using one hand, with no extra tools for a secure, positive connection. It can't come loose until you want it to. Pull and turn the locking knob and it loosens like any traditional clamp.

 

Catalog#	Main Line Range	Max. Amps Continuous	Rating	OAL Length (in.)	Weight (lbs.)
1786	477 MCM (.9"-.162")	400	36 kV 0-0	11.5	3.9
2116	954 MCM (1.25"-.162")	400	21 kV 0-GRD	11.5	4.9

SALCOR®

 

SALCOR® Jumper Clamp not only provides a superior grip, but also resists ozone cutting and tracking. Being molded of rubber, these handles are inherently impact resistant and extremely durable. The body and jaw are made from a copper base alloy. The lower ring contact is made of self lubricating bronze. Assemble jumpers with insulated jumper cable and 5/8"-11 NC threaded ferrules.

 

Catalog#	Main Line Range	Max. Amps Continuous	Rating	OAL Length (in.)	Weight (lbs.)
2260	477 MCM (.9"-.162")	400	36 kV 0-0	11.5	4.8