Section 2400: Hot Sticks, Accessories and Care

Epoxiglas®

Telescopic Hot Sticks with Tip Lock Feature:

• For Long Reach, Speed, Convenience and Safety.
• 100% Tested per OSHA and ASTM F-711
• Tip completely retracts and locks into next larger section giving double wall strength and rigidity for heavy lifting operations

Specifications for All Models:

• Tip Diameter Extended: 7/8"
• Tip Diameter Retracted: 1-3/32"

• Aerial lift bucket accessories:
• Tested per OSHA and ASTM F-711
• Unicellular foam filled tip sections eliminates trapped moisture.
• The Tel-O-Pole Telescopic Hot Stick, has a tip section that is reinforced to eliminate breakage
• All sections are reinforced high density electrical grade laminate - unusual color, stability, greater strength, and high dielectric properties

Specifications for All Models:

• Tip Diameter: 7/8"

• A unique triangular design by Hastings Fiber Glass
• Triangle Shape enables each section to "Lock in automatically"
• More Versatile - Use only the number of required sections to perform each job
• Easy Disassembly - Simply depress the lock button and slide section, or sections out; no tools are required for disassembly

The most versatile tool in a lineworker's hands, the Grip-All stick puts an easy-to-control "finger" on an insulated pole. Although primarily designed for installing hot-line and grounding clamps, it serves both overhead and underground circuits with various end fittings.

Commonly called a "shotgun," the operating mechanism incorporates a sliding hand grip that opens the hook to grasp a clamp eyescrew and retract it into the tool head. A thumb latch then must be depressed to release the locked hand grip so it can open the hook.

While the tool head is of Lexan® for close-quarter operations, the worker must maintain recommended working distance solely on the Epoxiglas® pole section of the handle as the hook and its actuator are metal parts.

Easy to care for, Grip-All sticks do not require field stripping to clean. All insulated parts including the operating rod are outside the main pole, readily accessible to wipe dry.

CAUTION: Do not clean the plastic head with solvent.

Note: Add suffix "A" to include universal fitting.

Replacement Parts for Single-Piece and Hinged Grip-All Clampsticks.

Head Repair Kit includes head, roll pin, epoxy bond kit and instructions.

Ideal for troubleshooters with limited tool-storage space in their cars, this folding version operates with the same features as the one-piece style.

Note: Add suffix "A" to include universal fitting.

Both external and internal rod clampsticks offer rugged operation for overhead and underground service. Many components of the external and internal rod clampsticks are interchangeable.

Internal Rod Clampstick

Operating rod is protected from damage and contamination, and "floats" inside the pole for smooth operation.

Streamline design for easier operation...fewer external parts to catch obstructions.

Disconnect sticks provide insulation for linemen in opening and closing disconnect switches and cutouts. They are also used for installing and removing open-link fuse links. Poles are made of Epoxiglas® NEMA - standard heads of cast bronze are of three types - switch head, disconnect head, or spliced disconnect head.

Storage Bag not included, must be ordered separately.

Note: "A" suffix includes universal head on opposite end of disconnect stick.

Interlock with Universal Tools

Designed for use as a hot sitck handle for Universal Tools, Chance Universal Poles are made of Chance Epoxiglas® and lightweight Chance aluminum castings.

Storm Tool for Bad Weather

The Storm Tool, a Universal Pole with special rubber insulator skirts, is designed for emergency use. It provides extra leakage distance and disrupts water paths. Skirts break up water streams that would otherwise run down the pole.

Estex hot stick bags are made from heavy canvas or vinyl nylon.

Protects and safeguards your tools and equipment: Copper Tubing, Plumbing Supplies, Disconnect Sticks, Valuable Tools and Sensitive Instruments.

Ideal for utility pick-ups, trucks and vans: Electrical Service Companies, Plumbers, TV & Cable Companies, Telephone Vehicles and Contractors & Surveyors.

End caps available of same quality aluminum for all sizes. Aluminum saddle bracket and U-bolts available for 4-1/2", 6-5/8" and 8-5/8" tubes.

Design Features

The lightweight tool employs a simple, slide-hammer mechanism to easily disengage and assist in replacing elbows. The tool and grippers help the operator control the elbow and stiff underground cable lead.

For a sure, balanced grip the 5-pound slide hammer is plastisol coated and flared at both ends. Also, for secure handling, both front and rear handgrip areas of the pole are coated with Griptread, a grit-filled rubber-base paint.

Available in three lengths, the tools are made of 1-1/4" diameter orange Epoxiglas® pole. The 6 and 8 foot units meet OSHA requirements with 25 and 48 inches of insulation respectively from the tool end to the handguard. On the 4-1/2 foot unit insulation length measures 5 inches.

Operation

To pull an elbow connector: Insert hook through eye on elbow. Close down grippers on elbow by rotating pole. Support tool with one hand on front grip behind handguard and other hand on slide hammer. Slam hammer from front to rear anvil. Resulting impact should release elbow with sufficient momentum to withdraw it from the bushing without extended arcing.

To replace an elbow connector: Follow the same procedures for pulling except use slide hammer impact against front anvil to help seat the elbow.

The tool provides a sure grip for installing and disconnecting elbow terminators. The tool grabs the elbow and has a special integral hook that fits through the rubber eye of an elbow or the metal hook of a bushing cap so that the lineman has complete, positive control, overcoming the resistance of the stiff underground cable.

Silicon bronze tool used for opening and closing switches and cutouts. The switch hook has a button end to prevent slipping out of the disconnect pull ring. Finger is 1-1/2" long, 3/8" diameter; button is 5/8" diameter.

Equipped with Adapter for use with Universal Stick

Drop forged steel double cutting action blades. Two pulley rope string triples power for cutting limbs up to 1-1/2" dia. Universal saw can be attached to head. Complete unit mounted on 12" fiberglass shaft with universal adapter and 25 foot polypropylene rope.

Any of three styles can be used with Chance Pistol-Grip Handle. Tree Trimmers, Universal or Telescoping Tools.

Saw M4455-26 has deep-notched teeth for fast pullout.

Saw M4455-26A has finer teeth for quick cuts.

Saw C403-2213 has black Teflon® coating on fine-toothed blade for smooth, non-stick action.

• Easy to install - clamps are duck bill type so jumper can be supported by conductor while hand tightened
• Thrust bearing design provides low friction for tightening clamp
• Bronze clamping rings have serrated contact surface to insure good electical contact with conductors
• The large range jumper handle is made from bright yellow, impact resistant modified polyolefin material
• Grip tabs are molded in for easy gripping with rubber gloves
• Conductor clamp is machined from brass bar stock
• Rated for 400 Amps
• Continuous current maximum rating, this rating depends on the rating of the jumper cable used with the clamps

CAUTION: Jumper Clamps are not designed to be installed on energized lines without proper safety equipment, i.e. rubber gloves and sleeves.

*Note: If 25 KV or 35 KV cable is required, Large range clamps must be used.

A Universal Clamp Stick Head for use with Eye Screw Grounding Clamps. The 6" head is for long eye screw grounding clamps.

All brushes have stainless steel bristles to allow the cleanest connection possible.

Stainless steel eliminates rust deterioration of bristles.

Compact "U" type brushes for tight clearances and easy storage in linemans pouches.

V-position of brushes gives 2-sided cleaning action. As brushes wear, they can be rotated, by loosening the anchor screws, so that unused bristles will come in contact with conductor.

Semi-tubular shape allows linemen to clean 6" of entire circumference of conductor with two stick position.

Semi-tubular shape allows linemen to clean 6" of entire circumference of conductor.

Fits all Tel-O-Pole Hot Sticks and universal sticks

A photo electric control tester for photo electric switches and lamps.

Creates "instant midnight" by completely eliminating all direct and reflected light. Designed for use on twist lock type controls up to 4 inches in diameter.

Used with Tel-O-Pole Hot Sticks for testing controls and lamps from ground. Easily threads through tight loops, brackets, and wires.

Adaptable to all Hot Sticks equipped with universal type heads...can be used with shorter length Hot Sticks to allow safe checking from aerial buckets when loops, brackets, or wires restrict mobility.

The NEW "FUSE CLAW" from HASTINGS, with its innovative design for installing, removing, and changing-out cutout fuse barrels, is a must for all linemen, line servicemen, trouble-workers, trouble-trucks, and emergency crews!

Features:

• Unique cradle design to stabilize fuse-barrel during lifting
• Cradle is reversible so hook can be adapted for right handed or left handed operation
• Spring-Loaded tabs to hold fuse-barrel in place and minimize movement
• High visibility Fluorescent tab for capturing the eye of the fuse barrel
• Fiberglass dielectric main body
• Standard universal fitting for use with all tel-o-poles and universal sticks
• Designed by a lineman for a lineman
• Designed to fit/install standard 100 Amp cut-out fuse barrels

Benifits:

• Eliminates fuses from inadvertently falling off your tel-o-pole or universal stick
• Reduces the possibility of Accidents
• Protects the public and property from falling fuse barrels in congested areas or parking lots
• Now, a secure holding tool is available to raise and install fuse barrels
• Saves re-fusing time
• Reduces outage time
• Easily adaptable to all hot sticks with universal fittings

Hold card tagging tool is manufactured from bright safety yellow thermoplastic. Tagging tool is dielectric and contains no metal parts.

• Non-metallic thermoplastic hook can be installed over most hardware and it will retain itself with "spring like" memory
• Duckbill hook design to help make installation with hot sticks quick and easy
• Molded in eye for easy installation using all modles of shotgun sticks
• Molded in eye for attachment of hold cards with cords or straps
• Molded in hooks for attachment of hold cards with metal grommets

Packaged to put convenience on the job every day.

Small pocket-size packets encourage frequent cleaning of insulated hot-line tools, line hose and rubber blankets. This helps utilities stay in compliance with OSHA 29 CFR 1910.269.

The unique formulation of Moisture Eater 2 removes concerns about wasting it while taking time to thoroughly clean tools. It has a much lower evaporation rate than other hotline tool cleaners.

You can expect drying times from 10 to 20 minutes without concern because it contains no water and actually dissolves water in its presence.

By enviromental design, the Moisture Eater 2 formula does not contain chlorinated solvents harmful to the Earth's ozone layer. The proprietary Moisture Eater 2 mix contains two solvents: One for oils, waxes and silicone-type contamination; one for contamination wet with water. This combination is ideally suited for cleaning hot-line tools. A by-product of citrus fruit, one component is biodegradable. The other protects it from decomposing until used.

Small pocket-size packets encourage frequent care of insulated hot-line tools. This helps utilities stay in compliance with OSHA 29 CFR 1910.269(j). To urge daily tool care, the words "You can comply with OSHA!" appear on each dispenser box of 50 wipes. The hanger box holds 50 wipes to keep them handy in crew bays, on trailers and in trucks. The convenience of sealed wipes mean no more rags to store or try to keep clean in the field. The disposable wipes are so easy to use. Just zip open a foil packet, pull out the siliconesaturated 8" x 10" lint-free towel and wipe down the hotstick. These wipes contain the same silicone that impregnaes Hot Stick Wiping Cloths in the Chance Epoxiglas® Cleaning Kit. Using the cloths or Silicone Wipes on fiberglass tools removes dust and deposits a thin protective coat that helps resist accumulation of dirt and other airborne contaminants. As the last part in the everyday clean-and-wipe routine, a Silicone Wipe replaces the film of protection that cleaners such as Moisture Eater II remove along with contaminants. This final silicone "step" helps preserve the benefits not only of daily cleaning but also when refinishing tool surfaces. Used after Chance Gloss Restorer, the sealed and disposable Silicone Wipes assure a clean application of a preservative layer on the new surfaces.

Epoxiglas®

 

The items contained in this kit are essential fo the care and maintenance of Epoxiglas® tools and insulated boom sections of aerial lift trucks. The proper use of these maintenance aids will ensure that maximum and useful life is obtained from Epoxiglas products. Do not use on Gel-coat or painted boom surfaces.

1. Moisture Eater 2 - This cleaner should be used on contaminated Epoxiglas during general tool maintenance and in preparation for reglossing a tool's surface. Moisture Eater removes moisture and a wide variety of contaminants such as dirt, tar, grease, tree sap, light metal rubbings and old surface coatings without harming the Epoxiglas material.

2. Abrasive Cleaning Pads - These pads are used in conjunction with Moisture Eater 2 to remove contamination that clings to the tool or contamination ground into scars and scuffs in the tools surface. Gloss restorer must be applied after using these pads since cleaning with Moisture Eater 2 will remove the glossy finish on the tool as well as contamination. The pads may also be used on metal parts to remove oxides and surface corrosion.

Gloss Restorer Kit - This kit consists of two parts. When mixed and applied to the surface of a cleaned Epoxiglas tool they combine to form a clear, tough coating that replaces the origninal gloss and protects against contamination and moisture.

 

Catalog#	Description
C400-2365	Epoxiglas Cleaning Kit
The above kit consists of the following items: (Each may also be ordered separately.)
C400-2364	Moisture Eater 2 Cleaner, 1 gal.
C400-1166	Abrasive Cleaning Pads (box of 20)
C400-1520	Gloss Restorer Kit
M1904	Hot Stick Wiping Cloth (2 in Kit above)

A High Grade Carnuba Wax specifically formulated for application to fiberglass finishes.

Properly applied, the wax will produce a hard tack-free weather resistant surface - resistant to temperature and weather extremes.

Wax may be applied by hand and hand polished - however machine polish is recommended due to high carnuba wax content.

Fiberglass Cleaner/Wax - 16 fl. oz. Bottle. Packed 12 bottles per case.

Super Salco® is a concentrated detergent with a special grease release formula that removes oils, grease and dirt. Just dilute with water, apply with a rag or sponge and rinse thoroughly.