3M 5696K Cold Shrink 3 Terms/Kit 6 Skirt Termination Kit

Overview

3M Cold Shrink QT-II terminations provide easy installation for a broad spectrum of indoor and outdoor applications. The Cold Shrink QT-II termination is based on specially formulated, track-resistant silicone rubber insulators with built-in Hi-K stress relief. The insulators are pre-stretched around a spiral -wound, plastic core. When the terminator is slipped over a properly prepared cable and the core is removed, the terminator immediately shrinks to the cable`s dimensions. The result is a void-free, flexible seal without special tools or torches. For Tape, Wire, an UniShield Shield Cable.

Conductor Size Range for

· 15 kV (100%): 3/0 AWG-400 kcmil

· 15 kV (133%): 2/0 AWG-350 kcmil

· 25/28 kV:1/0 AWG-250 kcmil

· 35 kV: 2-3/0 AWG

Specifications

• Voltage: 35 kV, 25/28 kV, 15 kV
• BIL: 200 kV
• Insulation Rejacketing: No
• Product Family: QT-II
• Product Series: 5690K
• Insulation Level: 100%, 133%
• Number of Conductors: 1
• Conductor Sizes: 1/0 AWG, 250 kcmil, 2/0 AWG, 1 AWG, 3/0 AWG, 400 kcmil, 2 AWG, 300 kcmil, 4/0 AWG, 350 kcmil
• Indoor/Outdoor: Outdoor Skirted
• Breakout Boot: No
• RoHS 2011/65/EU Compliant: Undetermined
• Cable Insulation Outside Diameter Range (metric): 21.3-33.8 mm
• Family: QT-II
• Maximum Installed Length: 19.50 in (Tape and Wire Shield) 19.00 in (UniShield)
• Shielding Type: UniShield, Wire Shield, Tape Shield
• Number of Skirts: 8
• Agency Approvals: IEEE
• Lug/Stem Connector Included in Kit: No
• Cable Insulation Outside Diameter Range: 0.84-1.33 in
• Trademark: 3M
• Maximum Installed Length (metric): 495 mm (Tape and Wire Shield) 483 mm (UniShield)
• RoHS EU Comments: Contact 3M for information

Documents